Aicox Introduces Radiall Space Coaxial Interconnect Solutions

Radiall offers a wide range of coaxial interconnection solutions for Space (flight segment). From low power attenuators to high power terminations, Radiall has the experience and ability to design comprehensive solutions for the most demanding environments.

Here are some of their products:

Coaxial connectors
It has a wide range of 50 Ohm coaxial connectors with a frequency range up to the Q band (up to 50 GHz).

Coaxial attenuators
Its low-power coaxial attenuators are ESA (European State Agency) qualified, available up to 31.5 GHz with SMA 2.9 interface).

Coaxial Terminations
Radiall offers ESA rated high and low power coaxial loads. The product offering includes the following low power loads: SMA, SMA 2.9, TNC and SMP / SMP-LOCK.

Coaxial couplers and dividers
It designs passive couplers and power dividers that support up to 200 W (CW) of RF Power at its input: directional couplers, hybrid couplers, and 2-4 – 8-way splitters.

Connectorized coaxial cables
High-performance, lightweight, low-loss, highly flexible and high-power connectorized coaxial cables are ideal for a wide variety of solutions for the Space market.

For more information, click here.

 

/by

Aicox Soluciones presents the vector signal generators in monochannel and multichannel versions, from 10 MHz to 40 GHz from Anapico

 

AnaPico, from Switzerland, presents its APVSG series of vector signal generators (VSG) , which cover frequency ranges from 10 MHz to 4, 6, 12, 20 or 40 GHz and are available in single and multichannel versions. Each channel of the VSG has built-in arbitrary wave signal generation, RF and microwave signal generation, and analog and digital I / Q modulation.

These APVSGs models, with their characteristics and adjusted price, are perfectly adapted to a wide range of applications and markets: Quantum Computing , RADAR antenna tests ( Phased Array , etc.), wireless communications (mobile, point-to-point, etc.), radio surveillance, electronic warfare, among others.

Internal waveform memory stores 512 million 32-bit samples per sample, and with a maximum sample rate of 500 MSPS, each channel supports a maximum digital modulation bandwidth of 400 MHz.

The APVSG has a low phase noise of -125 dBc / Hz at 20 kHz offset from a 10 GHz carrier and harmonic, subharmonic and spurious suppression of> 50 dBc. The switching time is 200 ns.

The APVSG incorporates analog (pulse, AM, FM, PM, chirp) and digital (ASK, FSK, PSK, QAM and others) modulation, as well as accepting external analog and digital I / Q signal inputs. Customer-compiled digital I / Q data can be loaded into internal memory for playback and programmed sequential modulation.

For more information, click here.

 

/by
,

Aicox Introduces Radiall’s Q-MITAN ARINC 846 Connector

Radiall provides connectivity solutions for defense applications that require high density, high data speed and reliability. The Q-MTitanTM ARINC846 is a multi-fiber optical contact that can be used in various connectors such as MIL-DTL-38999, QuickFusio, EPX, and ARINC 600 to maintain excellent optical performance in harsh environments.

Q-MTitan ™ ARINC 846

Q-MTitan ARINC 846, specifically designed for high-density and high-speed data, has been rated for use in demanding environments. Its design protects a 12- or 24-channel MT ferrule and provides a rugged, sealed solution that fits a wide variety of multipin connectors, including 38999, ARINC 600, QuickFusio, and EN4644 EPX.

The Q-MTitan contact can be terminated in reinforced wire for outdoor applications or in ribbon fibers for indoor equipment.

Radiall designs and builds harnesses with a variety of interconnect solutions and provides comprehensive solutions for harsh environments. Compatible with a wide variety of connectors and transceivers, Q-MTitanTM provides a minimum of 12 optical channels on a Quadrax # 8 contact and can be used with Radiall’s 10 Gbps D-Lightsys® transceivers for an impressive data rate of 120 Gbps in a single contact.

Q-MTitan ARINC 846 Features and Benefits:

  • Modular – Fits into existing Quadrax cavities in commercial connectors (COTS).
  • High density: 12 or 24 optical channels in a single optical contact.
  • Rugged: rated for harsh environments with high levels of shock and vibration (41.7 Grms.)
  • Temperature range: -55 ° C to +125 ° C.
  • Durability: 500 mating cycles.
  • Cable retention: 68 N in round cable.

For more information, visit the web .

/by